Papad ki sabzi

Steps:

1. Connect the power cord to ROBOCOOK and switch ‘ON’ button. Press the Sauté́ Button in front dashboard and wait for 30 secs for the inner cooking pot to get heated up.

2. Add oil to the inner cooking pot and let it heat a bit. Add cumin seeds and let it splutter.

3. Add onion and sauté until it turns golden brown in colour. Add green chillies, ginger-garlic paste and sauté till raw smell goes.

4. Add tomato and sauté till it turns soft. Next add red chilli powder, turmeric powder, garam masala powder and sauté until the masalas get combined.

5. Now add salt, curd, chopped papad pieces and mix well. Add water and give a good stir. Press cancel to stop sauté.

6. Place the closing lid over the top, Turn and place the Pointer in ‘Close’ Position. Ensure the lid is firmly closed and Pressure release button should be on ‘DOWN’ Position.

7. Press the ‘Kitchadi’ pre-set menu button in the ROBOCOOK and select Medium. PIC TECHNOLOGY pre-sets temperature/pressure/timer for pre-cooking

8. After Pre-Cooking is done the cooking countdown will appear and starts down from 15 mins. Once the countdown comes down and cooking is completed it stops with 3 Beep sound and automatically switches to KEEP WARM mode. Press ‘Cancel’ if not required.

9. Wait for 10 mins to get Natural Pressure Release (OR) it can be released manually by pulling ‘UP’ the pressure release button. Ensure the pressure is released completely on both the methods

10. Now TWIST and Open the cooker. Switch to Keep warm or Off mode. Give a quick stir and garnish with coriander leaves.

11. Hot Papad Ki Subzi is ready to serve with roti.